Design and synthesis of polypyrrole conductive ink based on sulfated chitosan for bactericide carbendazim detection.

Conductive polymers (CPs) are typically insoluble in solvents, and devising biocompatible hydrophilic CPs is challenging and imperative to expand the applications of CPs. Herein, sulfated chitosan (SCS) is used as a green dopant instead of toxic poly(styrene sulfonate) (PSS), and SCS:polypyrrole (SCS:PPy) conductive ink is prepared by in situ polymerization. Due to the complex structure between PPy and SCS polyanion, the synthesized SCS:PPy dispersion forms a well-connected electric pathway and confers superior conductivity, dispersion stability, good film-forming ability, and high electrical stability. As proof of our concept, electrochemical sensing utilizing an SCS:PPy-modified screen-printed carbon electrode (SPCE) was performed towards carbendazim (CBZ). The SCS:PPy on the SPCE surface displayed greater sensitivity to CBZ because the conductive complex structure eased the electrocatalytic action of SCS:PPy by dramatically increasing the current intensity of CBZ oxidation and notably ameliorating stability. The sensor unveils the lowest detection value of 1.02 nM with a linear range of 0.05 to 906 µM for sensing trace CBZ by utilizing the pulse voltammetry technique. Interestingly, this senor shows excellent selectivity towards CBZ due to the formation of substantial interactions between SCS:PPy and CBZ, as demonstrated by molecular simulation studies. Furthermore, this sensor can precisely monitor CBZ in actual fruit and river water samples with satisfactory results. This study sheds light on the design and synthesis of sustainable hydrophilic CPs in the fabrication of sensors.

Protein-Aided Synthesis of Copper-Integrated Polyaniline Nanocomposite Encapsulated with Reduced Graphene Oxide for Highly Sensitive Electrochemical Detection of Dimetridazole in Real Samples.

Dimetridazole (DMZ) is a derivative of nitroimidazole and is a veterinary drug used as an antibiotic to treat bacterial or protozoal infections in poultry. The residues of DMZ cause harmful side effects in human beings. Thus, we have constructed a superior electrocatalyst for DMZ detection. A copper (Cu)-integrated poly(aniline) (PANI) electrocatalyst (PANI-Cu@BSA) was prepared by using a one-step method of biomimetic mineralization and polymerization using bovine serum albumin (BSA) as a stabilizer. Then, the synthesized PANI-Cu@BSA was encapsulated with reduced graphene oxide (rGO) using an ultrasonication method. The PANI-Cu@BSA/rGO nanocomposite had superior water dispersibility, high electrical conductivity, and nanoscale particles. Moreover, a PANI-Cu@BSA/rGO nanocomposite-modified, screen-printed carbon electrode was used for the sensitive electrochemical detection of DMZ. In phosphate buffer solution, the PANI-Cu@BSA/rGO/SPCE displayed a current intensity greater than PANI-Cu@BSA/SPCE, rGO/SPCE, and bare SPCE. This is because PANI-Cu@BSA combined with rGO increases fast electron transfer between the electrode and analyte, and this synergy results in analyte-electrode junctions with extraordinary conductivity and active surface areas. PANI-Cu@BSA/rGO/SPCE had a low detection limit, a high sensitivity, and a linear range of 1.78 nM, 5.96 µA µM-1 cm-2, and 0.79 to 2057 µM, respectively. The selective examination of DMZ was achieved with interfering molecules, and the PANI-Cu@BSA/rGO/SPCE showed excellent selectivity, stability, repeatability, and practicability.

Synthesis of High-Value Bio-Based Polyamide 12,36 Microcellular Foams with Excellent Dimensional Stability and Shape Recovery Properties.

The search for alternatives to petroleum-based thermoplastic polyamide elastomers (TPAEs) has recently drawn great interest. In this study, a bio-massed TPAE, PA12,36, was synthesized using 1,12-dodecanediamine (DDA) and fatty dimer acid (FDA, PripolTM1009) precursors via catalyst and solvent-free melt polycondensation. The molecular structure and molecular weight of the PA12,36 were characterized by 1H NMR, FTIR, and GPC. PA12,36 displayed a low melting temperature of 85.8 °C, an initial degradation temperature of 425 °C, and a glass-transition temperature of 30.4 °C, whereas it sustained satisfactory tensile strength (10.0 MPa) and superior strain at break (1378%). Furthermore, PA12,36 was foamed by supercritical CO2, and the cell size, cell density, and porosity were determined. The entangled long-chained FDA component generated a physically crosslinked network, which promoted the melt viscosity of PA12,36 against elongations of foam cell growth and increased foamability significantly. As a result, uniform structured cellular foams with a cell diameter of 15-24 µm and high cell density (1011 cells/cm3-1012 cells/cm3) were successfully achieved. The foaming window was widened from 76 to 81 °C, and the expansion ratio was increased from 4.8 to 9.6. Additionally, PA12,36 foam with a physically crosslinked structure presented a better creep shape recovery percentage (92-97.9%) and sturdier dimensional stability. This bio-based PA12,36 foam is a promising candidate to replace petroleum-based thermoplastic elastomer foams for engineering applications, particularly shoe soles.

Protein-assisted biomimetic synthesis of nanoscale gadolinium-integrated polypyrrole for synergetic and ultrasensitive electrochemical assays of nicardipine in biological samples.

Electrically conductive polymer nanomaterials signify a promising class of sensing platforms in the field of electrochemistry, but their applications as electrocatalysts are commonly limited by their poor colloidal stability in aqueous media and large particle sizes. Inspired by biomineralization approaches for integrating nanoscale materials, herein, a gadolinium (Gd)-integrated polypyrrole (PPy) electrocatalyst (namely, BSA@PPy-Gd) was successfully prepared by choosing bovine serum albumin (BSA) as a stabilizer for biomimetic mineralization and polymerization in a "one-step" manner. BSA@PPy-Gd possesses outstanding water dispersibility, nanoscale morphology, and improved electrical conductivity. The electrocatalytic competency of the electrochemical (EC) sensing platform fabricated for the sensitive detection of nicardipine (NCD) was assessed. The synergy of remarkable conductivity, superior active surface area, and electrostatic interactions stimulated by the combination of BSA with the NH group of PPy on BSA@PPy-Gd and Gd increases the fast electron transfer at the analyte-electrode junction. The fabricated EC sensor, BSA@PPy-Gd/glassy carbon electrode (GCE), exhibits a current intensity greater than that of PPy/GCE, BSA/GCE, and bare GCE in terms of peak height at a pH of 7.0 in phosphate buffer solution. The newly fabricated EC sensing platform shows excellent electrocatalytic activities for the electroreduction of NCD in terms of a low detection limit (2 nM), good sensitivity, linear dynamic detection ranges (0.01-575 µM), operational stability, and repeatability and was also tested on rat and human serum specimens.

Synthesis of hierarchically porous 3D polymeric carbon superstructures with nitrogen-doping by self-transformation: a robust electrocatalyst for the detection of herbicide bentazone.

Bentazone (BEZ) is one of the utmost selective problematic contact-past herbicide with high toxicity for humans owing to feasible contamination of surface and ground water. In this work, an electrochemical sensor has been developed for the sensitive detection of BEZ, based on hierarchically porous three-dimensional (3D) carbon superstructures (CS)-modified electrodes. The CSs (namely, CSHEX, CSPY, CSACN, and CSNOS) were prepared by the pyrolysis process from organic porous polyacrylonitrile (PAN) superstructure particles (namely, PANHEX, PANPY, PANACN, and PANNOS) obtained by free radical polymerization method using different solvents (hexane, pyridine, acetonitrile, and also no solvent). The assembly with the working electrode of CSs causes the electrocatalytic BEZ oxidation by rapid electron transfer compared to the PAN superstructures and bare electrodes. Intriguingly, compared to all electrodes, CSHEX-modified electrode showed the superior electrochemical detection of BEZ at a working potential of 0.99 V (vs. Ag/AgCl), very low detection limit (0.002 µM), wide dynamic linear range (0.03 to 200 µM), high sensitivity (9.95 µA µM-1 cm-2), and excellent reliability. The advanced sensors displayed an intensification of oxidation peak current of BEZ with high selectivity, remarkable sensitivity, and reproducibility for BEZ detection and received satisfactory outcomes designating the application of sensors for the determination of BEZ in river water samples.

Amperometric determination of ecotoxic N-methyl-p-aminophenol sulfate in photographic solution and river water samples based on graphene oxide/CeNbO4 nanocomposite catalyst.

The electronic conductivity of the metal oxides is generally increased by hybridization of highly conductive carbon supportive materials. In this present work, we have demonstrated a novel one-pot preparation of cerium niobate (CeNbO4) nanoparticles embedded with graphene oxide (GO/CeNbO4) composite, for ultrasensitive detection of the photographic developing agent, metol (MTL). The as-prepared GO/CeNbO4 was analyzed by various characterization techniques. The intensive characterization techniques were used to affirm the detailed structural moiety, size, morphology, and surface area of GO/CeNbO4. The GO/CeNbO4 modified glassy carbon electrode (GCE) affords a superior electrocatalytic activity toward MTL. The obtained amperometric response on the GO/CeNbO4/GCE holding an extremely low level detection of 10 nM and superior sensitivity of 10.97 µA µM-1 cm-2 toward MTL detection. Besides, the GO/CeNbO4/GCE also gives excellent selectivity, stability, repeatability, and reproducibility. We achieved excellent recovery results in real photographic solution and river water samples analysis with great accuracy. This work offers a novel insight into the growth of the carbon-based niobate family with electrochemical sensor applications.

Electrochemical sensing base for hazardous herbicide aclonifen using gadolinium niobate (GdNbO4) nanoparticles-actual river water and soil sample analysis.

The present work scrutinized the voltammetric analysis of hazardous herbicide aclonifen (ACF) in actual soil and river water samples utilizing the electrochemical method. The electrochemical sensing device was fabricated for the determination of ACF using gadolinium niobate (GdNbO4) nanoparticles modified glassy carbon electrode (GCE). The novel GdNbO4 sensing material was prepared via a simple co-precipitation method. Several characterization techniques (TEM, EDS, XRD, XPS, and BET) were utilized to analyze the structural features of the GdNbO4. The enhanced electrochemical behavior of GdNbO4 modified GCE towards ACF was observed compared to bare GCE. The cyclic voltammetry response revealed that the prepared sensor shows the lower negative potential with a dramatic increase in the peak current of ACF compared to bare GCE. In the differential pulse voltammetry, the limit of detection (1.15 nM) and sensitivity (23 µA µM-1 cm-2) of the ACF on the GdNbO4 modified GCE was comparatively superior to the formerly proposed ACF based sensor. This sensor reveals good selectivity, repeatability, reproducibility, and long-term stability. The reliability of the sensor exhibits satisfactory recovery results for ACF detection in river water and soil samples.

Temperature-enabled reversible "On/Off" switch-like hazardous herbicide picloram voltammetric sensor in agricultural and environmental samples based on thermo-responsive PVCL-tethered MWCNT@Au catalyst.

Picloram (PCR), a vastly utilized chlorinated herbicide, is very stable in water and soil with severe ecological and health impacts. It is necessary to establish a fast and highly sensitive technique for accurately detecting trace level PCR in agricultural and environmental samples. We employed a temperature-responsive poly(N-vinylcaprolactam)-tethered multiwalled carbon nanotubes (MWCNT-PVCL) decorated gold nanoparticles (Au@MWCNT-PVCL) catalyst on the electrochemical sensor for the sensitive "On/Off" switch-like detection of PCR. The effect of temperature-sensitive catalyst surface chemistry on electrocatalytic activity was scrutinized. Results showed that the hydrophilic surface of PVCL at 25 °C (LCST) that immensely upgraded PCR oxidation on the catalyst in the electrochemical reaction, signifying the "On" state. The detection of the Au@MWCNT-PVCL modified electrode ranged from 0.02-183 µM with a low detection limit (LOD) of 1.5 nM at 40 °C toward PCR. The proposed sensor was successfully used to detect PCR in real agricultural and environmental samples.

Thermoreversible Switchlike Electrocatalytic Reduction of Tizanidine Based on a Graphene Oxide Tethered Stimuli-Responsive Smart Surface Supported Pd Catalyst.

In this work, a graphene oxide (GRO)-based temperature-sensitive smart catalytic support material was developed by tethering biodegradable and hydrophilic poly(N-vinylcaprolactam) (PVCL) on a GRO (i.e., GRO-PVCL) surface. GRO-PVCL-supported palladium catalyst (i.e., Pd/GRO-PVCL) was then prepared for tizanidine (TZN) electroreduction. The impact of a temperature-sensitive smart surface on the electrochemical and electrocatalytic properties was examined. Moreover, when the large surface area, excellent electron transfer, and electrochemical catalysis abilities of GRO were combined with the responsive characteristics of PVCL, temperature-triggered reversible electrocatalysis of TZN with enhanced sensitivity has been proved. Results designated that GRO-PVCL exposed the hydrophilic surface at 20 °C, resulting in Pd NPs highly dispersed on the GRO-PVCL surface. Subsequently, the wettability of the Pd catalyst surface arbitrarily adapted to hydrophobicity at 40 °C, which highly enhanced the TZN reduction on the catalyst in electrochemical detection. The synergistic effect amid Pd and GRO-PVCL on Pd/GRO-PVCL improved the electrocatalytic activity of TZN. The detection of TZN with the Pd/GRO-PVCL modified electrode ranged from 0.02 to 276 µM with a low detection limit of 0.0015 µM at 40 °C. The Pd/GRO-PVCL modified electrode also possesses excellent stability, reproducibility, and anti-interference ability. Lastly, the modified electrode attained good recovery results in human urine and human plasma samples for the determination of TZN and also pharmacokinetics study in rat plasma.

Sonochemical synthesis of novel thermo-responsive polymer and tungsten dioxide composite for the temperature-controlled reversible "on-off" electrochemical detection of ß-Blocker metoprolol.

Thermo-responsive polymer nanocomposite based on poly (styrene-co-N-isopropylacrylamide) hybrid tungsten dioxide (WO2@PS-co-PNIPAM) was synthesized by a facile ultrasonic irradiation (Frequency; 20 kHz, power; 180 W, calorimetrically determined power; 5.73 W in the bath, and Type; probe) method in the presence of water as inisolv. The as-synthesized WO2@PS-co-PNIPAM modified glassy carbon electrode (WO2@PS-co-PNIPAM/GCE) was acting as a reversibly switched detection for the electrooxidation of metoprolol (MTP), with the thermal stimuli response of the PNIPAM. In below lower critical solution temperature (LCST), the PS-co-PNIPAM expanded to embed the electroactive sites of WO2, and the MTP could not proceed via the polymer to attain electronic transfer, indicating the "off" state. Rather, in above LCST, the PS-co-PNIPAM shrank to reveal electroactive sites and expand cyclic voltammetric background peak currents, the MTP was capable to undergo electro-oxidation reaction usually and produce the response current, indicating "on" state. Additionally, the proposed sensor had excellent sensitivity (2.21 µA µM-1 cm-2), wide dynamic range (0.05-306 µM), and a low limit of detection of 0.03 µM for MTP. Intriguingly, the fabricated sensor demonstrates the good selectivity towards the detection of MTP among the possible interfering compounds. Eventually, the WO2@PS-co-PNIPAM/GCE has been utilized in the analysis of MTP in human blood serum samples.

One-Pot Sustainable Synthesis of Ce2S3/Gum Arabic Carbon Flower Nanocomposites for the Detection of Insecticide Imidacloprid.

Investigating ecofriendly sustainable materials with excellent electrocatalytic activity is a pivotal approach for the analysis field. The present work reports on the preparation of novel three-dimensional (3D) cerium sulfide with gum arabic carbon flowers (Ce2S3/GACFs) via the hydrothermal method by using l-cysteine as a sulfur source, binding, and reducing agents. The intensive characterization techniques were utilized to corroborate the structural moiety, morphology, and size of Ce2S3/GACFs. The obtained 3D Ce2S3/GACF construction has excellent active sites, and hence it prevents the accumulation of carbon flowers. Furthermore, the obtained Ce2S3/GACF/glassy carbon electrode (GCE) could afford a very high electrocatalytic activity, possessing an exceedingly low detection limit of 32 nM, the high sensitivity of 2.65 µA µM-1 cm-2, good repeatability, and high stability for the detection of insecticide imidacloprid (IMC). The Ce2S3/GACF/GCE also provides a wide linear range of 0.05-1266 µM toward IMC detection. The excellent recovery results (90-99.3%) are achieved by using various spiked real food samples at Ce2S3/GACF/GCE. Confidently, this work gives up novel construction of 3D metal-carbon-based bioderived material for its catalytic application in the future.

Carbon fibers coated with urchin-like copper sulfide for nonenzymatic voltammetric sensing of glucose.

Urchin-like CuS was grown on xanthan gum-derived carbon nanofibers to obtain a sensor for enzyme-free electrochemical sensing of glucose. The unique nanostructure of the sensor provides a large specific surface, more electrocatalytically active sites, and high electrical conductivity. The voltammetric response to glucose, best measured at around 57 mV (vs. Ag/AgCl (E/V)) in 0.1 M NaOH solution, covers two linear ranges, one from 0.1-125 µM, another from 0.16 to 1.2 mM. The sensitivity is quite high (23.7 µA mM-1 cm-2), and the detection limit is low (19 nM at S/N = 3). The sensor has high selectivity against potentially interfering molecules such as fructose, appreciable operational stability, excellent durability, and good repeatability (with relative standard deviations of 2.3%). It was successfully applied to the determination of glucose in diluted serum samples. Graphical abstractSchematic representation of electrochemical detection of glucose based on the use of a screen printed carbon electrode (SPCE) modified with CuS and xanthan gum-derived carbon nanofibers (XGCNFs).

Simultaneous voltammetric determination of acetaminophen, naproxen, and theophylline using an in-situ polymerized poly(acrylic acid) nanogel covalently grafted onto a carbon black/La2O3 composite.

Lanthanum oxide nanomaterials were decorated with carbon black (CB) and grafted with a poly(acrylic acid) nanogel to obtain a composite material (CB-g-PAA/La2O3) for simultaneous determination of acetaminophen (AMP), naproxen (NPX), and theophylline (TPH). The nanogel was synthesized by in-situ free radical polymerization. The composite was dropped onto a glassy carbon electrode (GCE), and the modified GCE displays robust electrocatalytic activity towards AMP, NPX, and TPH, with voltammetric signals that are enhanced compared to a bare GCE. Features of merit for AMP, NPX, and TPH, respectively, include (a) peak potentials of 0.42, 0.85 and 0.12 V (vs. Ag/AgCl), (b) linear ranges from 0.05-887, 0.05-884, and 0.02-888 µM, and (c) detection limits of 20, 35, and 15 nM. The practical applicability of the CB-g-PAA/La2O3/GCE was illustrated by analyzing serum and urine samples. Graphical abstract Schematic presentation of simultaneous electrochemical sensing of acetaminophen (AMP), naproxen (NPX), and theophylline (TPH) in real sample analysis using poly(acrylic acid) nanogel covalently grafted onto a carbon black/La2O3 composite (CB-g-PAA/La2O3/GCE).

Synthesis, characterization and catalytic performance of nanostructured dysprosium molybdate catalyst for selective biomolecule detection in biological and pharmaceutical samples.

The current study reports a new, simple and fast method using a flake-like dysprosium molybdate (Dy2MoO6; FL-DyM) nanostructured material to detect the antibiotic drug metronidazole (METZ). This nanocomposite material was employed on the surface of a glassy carbon electrode (GCE) to develop the electrode (FL-DyM/GCE). Further, the synthesized FL-DyM was systematically characterized by powder X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray diffraction (EDS), elemental mapping, X-ray photoelectron spectroscopy (XPS), and Brunauer-Emmett-Teller (BET) analyses. Cyclic (CV) and differential pulse voltammetry (DPV) techniques were used to study the electrochemical properties. The FL-DyM/GCE-based sensor demonstrated excellent selectivity and sensitivity for the detection of the drug METZ, which could be attributed to the strong affinity of FL-DyM towards the -NO2 group in METZ, and the good electrocatalytic activity and conductivity of FL-DyM. The fabrication and optimization of the working electrode were accomplished with CV and DPV obtained by scan rate and pH studies. Compared to the bare GCE and other rare-earth metal molybdates, the FL-DyM/GCE sensor displayed a superior electrocatalytic activity response for METZ detection. The sensor demonstrated a good linear relationship over the concentration range of 0.01-2363 µM. The quantification and detection limits were found to be 0.010 µM and 0.0030 µM, respectively. The FL-DyM/GCE sensor displayed excellent selectivity, repeatability, reproducibility, and stability for the detection of METZ in human urine and commercial METZ tablet samples, which validates the new technique for efficient drug sensing in practical applications.

Ultrasound-promoted covalent functionalization of CNFs with thermo-sensitive PNIPAM via "grafting-from" strategy for on/off switchable electrochemical determination of clothianidin.

A thermo-sensitive poly (N-isopropylacrylamide) covalently grafted carbon nanofibers (CNFs-g-PNIPAM) was designed and synthesized via ultrasonic "grafting-from" strategy for the first time. CNFs-g-PNIPAM could well perform the reversible regulation of hydrophilic/hydrophobic states in aqueous solution upon the switching of the temperature signal. Such distinctive property, CNFs-g-PNIPAM modified glassy carbon electrode (CNFs-g-PNIPAM/GC electrode) shows "on/off" switchability and temperature-tunable electrocatalytic activity towards clothianidin (CLD) that can be stimulated by external temperature. Cyclic voltammetry of CLD at the CNFs-g-PNIPAM/GC electrode displayed higher peak current at 25 °C showing the "on" state; at 40 °C, the peak current was significantly suppressed, showing the "off" state. The CNFs-g-PNIPAM/GC electrode reveal the better electrochemical performance of 'on/off' switching effect compared to virgin PNIPAM, due to the large surface area, good electron-transfer, and an intrinsic property of introduced CNFs. Moreover, this switchable sensing platform allows determining CLD in a good sensitivity (2.32 µA µM-1 cm-2) with a low detection limit (LOD) of 0.03 µM at 25 °C compared to 40 °C (LOD = 1.3 µM). Besides, this method was successfully applied to the determination of CLD in spiked apple extract and lake water samples. The switchable electrocatalytic performance of CNFs-g-PNIPAM/GC electrode may greatly enhance the flexibility of its application in the area of electrochemical sensor and electrocatalysis.

Ultrasound-induced radicals initiated the formation of inorganic-organic Pr2O3/polystyrene hybrid composite for electro-oxidative determination of chemotherapeutic drug methotrexate.

To dates, the facile synthesis of inorganic-coated organic polymer composite has received greater attention in the order of research fields including advanced materials and electrochemical analysis owing to the complementary or synergistic effects. In this context, Pr2O3 and Pr2O3 coated polystyrene (Pr2O3/PS) inorganic-organic colloidal composite were prepared via ultrasound-induced radicals initiated precipitation and dispersion polymerization methods. The synthesized Pr2O3/PS composite was systematically studied by FE-SEM, TEM, EDX, FT-IR, XRD, and XPS analysis. This composite modified glassy carbon electrode (Pr2O3/PS GCE) was utilized to construct a novel electrochemical sensor for the detection assay of chemotherapy agent methotrexate (MTA). Under optimal condition, the designed sensor showed outstanding performance for MTA trace level detection over the linear concentration range of 0.01-236 µM with a detection limit of 0.8 nM for MTA. Furthermore, the prepared sensor accomplished excellent stability and relevant reproducibility, in addition to reliable practical assay in real human blood serum and urine samples. Besides, the possible MTA sensing mechanism of Pr2O3/PS GCE has been deliberated in detail. Our finding suggested that the developed Pr2O3/PS composite might be a favorable material for the fabrication of the high-performance electrochemical sensor.

Biocompatible chitosan-pectin polyelectrolyte complex for simultaneous electrochemical determination of metronidazole and metribuzin.

Development of novel biocompatible sensor material suitable for modest, cost-effective, and rapid practical application is a demanding research interest in the field of electroanalytical chemistry. In this context, for the first time, we utilized biocompatible chitosan-pectin biopolyelectrolyte (CS-PC BPE) complex for the simultaneous electroreduction of an important antibiotic drug (metronidazole-MNZ) and herbicide (metribuzin-MTZ). This sensor reveals an attractive welfares such as simplicity, biocompatibility, and low production cost. Under optimized experimental conditions, the electroanalytical investigation confirmed that CS-PC BPE modified glassy carbon electrode (CS-PC BPE/GCE) was found to sense MNZ and MTZ in the nanomolar range. Moreover, as-prepared CS-PC BPE/GCE exhibited prominent selectivity, stability, and reproducibility. Additionally, the possible MNZ and MTZ sensing mechanism of CS-PC BPE/GCE have been discussed in detail. Lastly, real sample analysis was also carried out and revealed from several investigations that the CS-PC BPE/GCE is a good electrochemical sensor system for the detection of targeted analytes.

Enzyme-free electrochemical detection of nanomolar levels of the organophosphorus pesticide paraoxon-ethyl by using a poly(N-isopropyl acrylamide)-chitosan microgel decorated with palladium nanoparticles.

A rapid voltammetric method is described for the determination of the organophosphorus pesticide paraoxon-ethyl (PEL). A glassy carbon electrode (GCE) was modified with a composite consisting of a poly(N-isopropylacrylamide)-chitosan microgel with incorporated palladium nanoparticles. The microgel was characterized by FE-SEM, EDX, XPS, FTIR, XRD, and EIS. The modified GCE is shown to enable direct electro-reductive determination of PEL by using differential pulse voltammetry. The method works in pH 7 solution and in the 0.01 µM to 1.3 mM PEL concentration range. At a typical working potential of -0.66 V (vs. Ag/AgCl) (at 50 mV/s), the detection limit is as low as 0.7 nM, and the electrochemical sensitivity is 1.60 µA µM-1 cm-2. Intriguingly, the modified GCE displays good recovery when applied to bok choy and water samples. Graphical abstract Schematic of an electrochemical method for determination of paraoxon ethyl (PEL) in bok choy extract and water by using poly(N-isopropyl acrylamide)-chitosan microgel decorated with palladium nanoparticle-modified glassy carbon electrodes (PdNPs/PNIPAM-CT microgel/GCE).

Chitosan-gold collapse gel/poly (bromophenol blue) redox-active film. A perspective for selective electrochemical sensing of flutamide.

Chitosan-gold collapse gel (CS-Au CG) was prepared by reducing chloroauric acid (HAuCl4) with a polysaccharide, chitosan (CS), in the absence of chemical and physical agents. CS-Au CG was used for the first time as a suitable nano-biocomposite sensing film for efficient one-step electrochemical deposition of poly (bromophenol blue) (PBPB) redox mediator through amino-hydroxyl reaction to prepare a novel anti-androgen drug flutamide (FLU) sensor using glassy carbon electrode (GCE). The effect of electropolymerization cycle, scan rate, pH, and concentration of CS-Au CG/PBPB film on electrochemical behavior of FLU molecules was investigated. The excellent synergetic effect of CS-Au CG/PBPB film showed substantially enhanced electrocatalytic activity for FLU due to the halogen-nitro synthon molecular recognition processes. The selectivity of CS-Au CG/PBPB film sensor for FLU was discussed in detail. The fabricated electrochemical sensor exhibited good linearity in the ranges of 0.01-1245 µM. And also superior sensitivity (0.63 µAµM-1 cm-2) along with low limit of detection (4.8 nM) was obtained for FLU determination. The CS-Au CG/PBPB film showed an excellent selectivity, good reproducibility, and stability. In addition, the proposed sensor was successfully used to analysis of FLU drug in human urine and human blood serum samples with satisfactory results.